Labeling machine often broken label how to deal with?

        Hey, my labeling machine how to break the label again? Recently, many labeling machine manufacturers in the process of commissioning new samples, there will be the phenomenon of broken labels, the reasons for which are multifaceted, let me introduce you to some of the site often appear the reasons for broken labels and the way to deal with them.

　　1、The problem of the label itself

　　Label backing paper cut injury is a cause of broken label, this problem has a very obvious phenomenon is the fracture is very neat, careful observation can be found, the label backing paper has obvious traces of cut injury, as follows, this situation is due to do label is too heavy pressure of the tool led to the need to redo the label.

　　Label backing material is not right will also lead to broken labels, the standard labeling machine labels are selected Grassian, relative to the backing of coated paper back due to the strength of the backing paper is not enough to lead to broken labels

　　2, the peeling of the label plate problem

　　In addition to the label itself, the main label breakage is also concentrated in the peeling plate, one of the main reasons is that the peeling plate is too sharp, peeling plate is made of sheet metal machine processing, the main cutter at the cutting and milling volume is too large, the main way of handling is to manually polish the cutter, so that the transition at the cutter is round and smooth some can then there is a broken label caused by the cutter is due to Peel the label plate assembly is crooked is not level, resulting in the label in the knife after the uneven force cut off the label, will also lead to broken label appear

　　3, the tensioning mechanism of the problem

　　In the whole head part, the purpose of the tensioning mechanism is to ensure that in the traction movement, the label can be relatively uniform, stable separation from the peeling plate, for this purpose, the label tensioning is required to ensure a certain amount of strength, when the strength is too large, will also lead to broken labels, can be solved by reducing the strength of the pressure label slam piece, the brake lever elasticity.