Comparison of simple tail sealer and ultrasonic tail sealer

Comparison of simple tail sealer and ultrasonic tail sealer

Simple tail sealing machine.

First, safety, this machine needs to manually put the hose near the cutter, and the cutter is exposed, not safe, because the cutter is sharp, where the hand touches, there will be flesh and skin damage.

Second, the appearance of the simple.

Third, there is no display, no concept of the parameters, the problem does not know where to check.

Fourth, there is no standard electric eye, can not be standardized.

Ultrasonic sealing machine.

The first point, the release mouth from the cutting knife distance, after the tube is put in, the base can be mechanically moved to the knife under the safety.

The second point, the appearance looks high.

The third point, there is a display, all the parameters at a glance. Even if the remote teaching can be directly taught how much to adjust a parameter, such as welding time plus 0.6 seconds and so on, the machine sealed out and the effect is not good, the project can directly look at your parameters, found that a parameter is not correct, immediately modified;.

Fourth point, there is a standard electric eye, no matter how to put the tube, you can automatically find the standard, the standard cut the tail.