Plane labeling machine crooked label causes and solutions

　　Automatic flat pagination labeling machine is a roll of self-adhesive paper labels on the PCB, products or prescribed packaging equipment, suitable for various industries. Labeling crooked label is one of the common problems of the plane labeling machine, what is the reason for the formation of this? How should be handled?

　　1, peel the label plate and the object is not straight, peel the label plate and the product is not straight, directly leading to the label on one side high and low so that the label is definitely crooked;

　　2, out of the labeling process label up and down tampering, label tension is not around the label rod and other parts of the label is not well pressed label;

　　3, the roll label wheel by the way up and down, the labeled object through the wheel attached to the flicker;

　　4, out of the label frequency and host speed does not match, there are pulling the label, dragging the label phenomenon;

　　5, peel off the plate after the label from the labeling items touching surface there is a small interval, resulting in the label in touch with the product easy to tilt, adjust the upper and lower head screw, the product on the peeling plate orientation, adjust the head screw to shorten the peeling plate and the product direct interval can be;

　　6, the peel plate and the labeled object is too small interval between the labeled surface, the labeled object in the process of transport labeling touches the peel plate, displacement occurs.

　　When the plane labeling labeling crooked, we can start from the following reasons to deal with.

　　1, check both sides of the labeling head is loose, with the manufacturer's configuration of good things to stabilize.

　　2, check whether the winding label material tray is loose or uneven speed, add oil lubrication can be.

　　3、Check the parameters of the operating system to prevent different products from being labeled under the same parameters of the equipment.

　　4、Finally adjust the labeling head and put the labeled products separately, and whether it is shaking and shaking when transporting with the delivery belt.

　　Warm tips, the first three steps must be operated after the shutdown. If the above four still can not deal with the flat labeling machine labeling crooked problem, please do not disassemble and replace the internal parts of the equipment, you need to move to the professionals for equipment maintenance.