Precautions for the operation of tube filling and sealing machine

Precautions for the operation of the tube filling and sealing machine  

          Tube filling and sealing machine is an automated filling machine, so at any time in the use of a variety of negligence may encounter different problems, the following to talk about the operation of the tube filling and sealing machine a few major considerations:.

1、Please clean up the surrounding environment before using the tube filling and sealing machine. Especially the automatic equipment can not be placed next to the equipment to prevent the normal operation of debris and dangerous goods.

                     2、The parts of the tube filling and sealing machine are finely machined by CNC lathe, and the parts are properly matched in size.

                     3、The operators of the tube filling and sealing machine are specially trained, so the operators' work clothes should be as sharp as possible. Special attention: the sleeves of the work clothes must be tied well and cannot be opened.

                     4、After all parts of the hose filling and sealing machine are adjusted, slowly rotate the machine to check whether the equipment is working normally and whether there are any vibrations or abnormalities.

                      5、The main drive system of the machine is located at the bottom of the machine, which is closed by the stainless steel door with lock. When adjusting the load, it must be opened and adjusted by a person (operator or maintenance technician). Before starting the machine again, be sure to confirm that all doors are in good condition.