Plastic tube filling and sealing machine frequently asked questions are as follows

Now plastic hose Filling and sealing machine is widely used in cosmetics, medicine and food and other occupations. These occupations produce products generally choose the hose as a packaging container, filling and sealing machine, can be ointment, cream, gel or viscous fluid and other materials into the hose, and then the end of the hose hot melt compression print code, trim and shape together to make finished products. Once the plastic hose filling and sealing machine is used improperly, the following problems are likely to occur.

Plastic tube filling and sealing machine common problems are as follows.

　　1, the appearance of the left side of the phenomenon 1 moment is generally too high temperature caused by. At this time should check whether the actual temperature is the temperature required for the normal operation of the standard hose. The practical temperature on the temperature indicator should be relatively stable at the set temperature (normal error range is between 1°C and 3°C).

　　2, one side has an ear: first check whether the heating head is correctly put into the heating head nest; then check the heating head and the verticality of the hose below. Another possible reason for the formation of the phenomenon of one side of the ear is that the two tails are clamped.

　　3, the tail seal from the middle of the hose cracked. This phenomenon is the formation of the heating head can not be used. Please replace the heating head with a larger one. The specification to judge the size of the heating head is to pierce the heating head into the inside of the hose and then pull it out, and feel a fine suction when pulling it out.

　　4, end seal explosion-proof line under the "eye bag": this situation is manifested as the heater head venting hole height error, can be adjusted according to the following methods.

　　5、Hose tail center depression: This problem is generally formed by the incorrect scale of the tube cup.

　　The Filling and sealing machine is suitable for the filling and sealing needs of large diameter plastic tubes and composite tubes in the professions of medicine, food, cosmetics and daily chemical products. The automatic operating system finishes tube supply, tube cleaning, label identification, filling. The machine is suitable for the whole process of tube supply, tube cleaning, label identification, filling, hot melt, sealing, coding, edge cutting, and product production. Can be a variety of paste, paste, viscous fluid and other materials smoothly and accurately into the hose, complete the tube hot air heating, sealing, batch number, production date, etc.; intelligent temperature control cooling system, simple operation, good sealing tail firmly and securely; and safety devices, open the door and stop, no tube does not fill, overload maintenance.

　　Filling and sealing machine can smoothly and precisely inject all kinds of paste, cream, viscous fluid and other materials into the hose, and then finish the heating of hot air in the tube, sealing, batch number, production date, etc. This machine is widely used for filling and sealing of large diameter plastic tubes and compound tubes in pharmaceutical, food, cosmetic, daily chemical products and other occupations. It is an aspirational, useful and economical filling equipment.

　　In the long run Filling and sealing machine, with its economic and reasonable features, not only simplifies the packaging form and structure, as well as the related process and equipment, but also greatly reduces various wastes in the production and selling process. In addition, the filling and sealing machine eliminates many unstable factors, thus increasing the overall power. Tube filling and sealing machine