Operation and use of tube filling and sealing machine

　Tube filling and sealing machine is a high-tech equipment developed by our factory according to GMP production requirements, introducing advanced foreign technology and optimizing design. It is widely used in daily chemical, pharmaceutical, food and chemical industries. It is a special equipment for filling and sealing sticky materials such as cosmetics, toothpaste, ointment and shoe polish. Based on the original filling and sealing machine, this machine adopts the principle of sealing and disassembling, which greatly improves the production efficiency, simplifies the adjustment of sealing width and facilitates the replacement of sealing letters.

　　The machine's filling and sealing pressure teeth shifting and positioning etc. all adopt the integration principle of electromechanical photoelectricity and air pump. Through the cam indexing mechanism to complete the shifting positioning air pump filling, sealing and other actions. Filling heating sealing cutting tail ejecting and other seven processes. All actions are completed synchronously with the same output. Ensure the integration of the action and improve the reliability and stability of the action.

　　The power of the filling and sealing machine is controlled by the frequency conversion system, and users can adjust the corresponding speed according to different specifications and filling volume. Filling system is driven by air pump, plunger pump type one-way valve control structure with photoelectric induction structure to realize tube filling and constant movement. All parts in contact with materials are made of corrosion-resistant high chromium quality stainless steel. Filling and sealing machine

　　The machine has compact structure, easy to grasp the operation process, accurate filling, smooth running and low noise maintenance is convenient. It is the ideal filling and sealing machine equipment.

　　2. Operation rules

　　1. Turn on 220V power supply and gas source (pressure not less than 0.4Mpa), power indicator light on. The speed of this machine turntable is adjusted by inverter, turn on the inverter start switch, press the (RUN) button on the inverter, then rotate the inverter knob to control the speed. Turn on the main switch of air source, check whether the heating, sealing, tail cutting and ejecting cylinders are working normally.

　　2、Trial sealing of hose adopts different molds to match due to different specifications of hose. After installing the complete die holder, adjust the height to make the nozzle reach the sealing height. Turn on the heating switch and set the internal heating and external heating temperature. After turning on the power, the ammeter will indicate that the temperature should be gradually increased to reach the ideal sealing temperature. (Usually internal heating is set to 250 degrees and external heating is set to 210 degrees). After the temperature rises to the set value, it can be filled. Tail sealer

　　3、Adjust the filling volume. According to different specifications, turn the filling volume adjustment knob to adjust the filling volume. Filling machine uses photoelectric induction filling tube, adjust the measurement can be other containers first induction filling and then weighing.

　　4, adjust the production date number, remove the sealing machine pressure gear plate, replace the required production date font size.

　　5、After the above steps are adjusted, insert the sample tube before trying the machine.

　　Three filling and sealing machine maintenance

　　1 cam indexing mechanism in normal operation, the exhaust port should be loosened. The indexer lubricant adopts heavy-duty gear oil or other circulating oil of the same quality, which can be replenished or replaced regularly according to the actual situation.

　　2The filling and sealing machine should be cleaned and kept clean and fluent. The valve can be opened and closed freely to prevent foreign matter sand and other hard objects from being brought into the system and damaging the cylinder body.

　　3 Each filling and sealing machine transmission parts should be regularly filled with lubricant to maintain good lubrication to extend the service life of the machine.

　　4 Clamp should close the air source valve when opening. Do not cut off the air when clamping, so as not to damage the ejector rod.

　　5Filling and sealing machine debugging and maintenance should be carried out under the guidance of professionals, and pay attention to the safety operation of the moving parts and electrical appliances.